MICROBE LIFT Oxy Pond Cleaner

Microbe-Lift OPC Oxy Pond Cleaner will safely yet immediately breakdown accumulated debris from rocks, streams and on waterfalls.

- Uses Oxygen Power to break down unsightly debris
- Especially helpful on streams and waterfalls
- Deep cleans planters and rocks
- Oxidizes and Detoxifies
- Helps to prevent pond odors
- Use Weekly to Eliminate Stressful Pond Draining

Heavy Accumulation:
501-1000 gallons 8oz initially, 4oz weekly thereafter
1001-1500 gallons 12 oz initially, 6oz weekly thereafter
1501-2500 gallons 16 oz initially, 8oz weekly thereafter

For light accumulation use initial dosage at half dosage. Always test for ammonia in your pond water using Microbe-lift Ammonia Test Strips. Do not apply if ammonia levels exceet 1.0mg/L

DOSAGES

BEFORE USE: Use MICROBE-LIFT/ AMMONIA TEST STRIPS to test for the presence of ammonia in your pond water. If ammonia levels are above 0.8mg/L, DO NOT apply MICROBE-LIFT/ OPC OXY POND CLEANER until the ammonia level is brought down below 0.8mg/L. If ammonia levels exceed 1.0mg/L, add MICROBE-LIFT/ AMMONIA REMOVER.

Spot Treatment

Apply a light application to the area needing to be cleaned.

Large Ponds & Lakes

Apply around perimeter of pond/lakes as much as needed.

Pond Cleaning/ Non-Painted Surfaces

6 cups (96oz.) per 1,000 sq. ft. of surface area to be cleaned.


AFTER USE: Ammonia levels should be monitored for two days following applications of ANY/ALL oxygen release compounds as they can kill beneficial bacteria in a pond/lake resulting in an ammonia or nitrite spike. Use MICROBE-LIFT/ AMMONIA TEST STRIPS to test for the presence of ammonia. If your ammonia levels exceed 1.0mg/L., add MICROBE-LIFT/AMMONIA REMOVER to reduce the ammonia level to 0.8mg/L or below.